Specification
| EXPLOSION PROOF & SAMPLING TYPE FLAMMABLE GAS DETECTOR | |
| Model | GTD-5000F Ex |
| Measuring gas | Flammable gases (LNG, LPG, H2, Methane, Buthane & etc) |
| Measuring type | Auto Sampling type |
| Measuring method | lytic cell Hot wire semiconductor cell Thermal conductivity cell |
| Measuring range | 00% LEL 0~2,000ppm 0~100% Vol |
| Response time | < 15sec / 90% scale |
| Accuracy | ±3% / Full Scale |
| Parameter control | Front switch (calibration, maintenance, alarm setting) |
| Operation mode display | Alarm / Trouble LED , Flow rate |
| Measuring value display | FND Display(4-digit) |
| Alarm signal output | 250V 1A / 3-SPST relay contact (2-stage alarm, 1-trouble) |
| Output signal | Analog output : 4-20mA DC |
| Digital output : RS-485 Modbus(Option) | |
| Sampling method | Diaphragm Pump |
| Sampling line | OD 1/4 “(Standard) |
| Flow rate | 0 ~ 2,000 ml/min max |
| Cable/Distance | Power + Signal cable : 3-wire > 1.5sq(AWG16) / 1000m max |
| 4 – 20mA DC Signal : 2000m | |
| RS-485 Modbus Signal : 1000m | |
| Conduit connection | G. Rc. NPT 1/2″ & 3/4″ (G 3/4″ : Standard) |
| Mounting type | Wall mount |
| Operating temperature | -20℃ ~ +60 ℃ |
| Operating humidity | 5 to 99% RH (Non-condensing) |
| Operating power | Standard : 18 ~31V DC (24V DC normal) / 600mA max |
| Material | ALDC |
| Dimensions | 226.3(W) × 154(H) × 238(D) mm |
| Weight | 5kg |
| Approval | Explosion proof type (Ex d IIC T6, IP65) KCs |
